{"title":"Rawrr Parts","description":"\u003cp\u003eParts \u0026amp; Accessories for Rawrr bikes. \u003c\/p\u003e","products":[{"product_id":"rawrr-mantis-rear-susepension-kit-allterrain-72v-60v-by-emoto-x","title":"EMoto-X Rawrr Mantis Rear Susepension Kit Allterrain 72V \u0026 60V","description":"\u003cp\u003eEMoto-X Racing Rear Suspension Kit For Rawrr Mantis All Terrain 70V \u0026amp; Rawrr Mantis All Terrain 60V\u003c\/p\u003e\n\u003cp\u003eThe Stock rear shock on the Rawrr Mantis All Terrain 72V \u0026amp; 60V is WAY too stiff for anyone that weighs under 350 LBS.\u003c\/p\u003e\n\u003cp\u003eUse this EMoto-X Racing Rear Suspension Kit to replace that incredibly stiff stock Rawrr Mantis rear shock with ANY aftermarket or stock rear shock built for a Surron, Talaria or ERide Pro.\u003c\/p\u003e\n\u003cp\u003eMaterials:\u003c\/p\u003e\n\u003cp\u003eSpacers- CNC 6061 Aluminum\u003c\/p\u003e\n\u003cp\u003eNuts- Class 10 High Strength Steel Nylon Insert Locknut Zinc Plated\u003c\/p\u003e\n\u003cp\u003eWashers- Class 8.8 Steel Washer Zinc Plated\u003c\/p\u003e\n\u003cp\u003eBolts- Class 10.9 JIS High Strength Steel Flanged Hex Head Screw Zinc Plated\u003c\/p\u003e\n\u003cp\u003eEasy to install: 1) Shut off breaker and remove battery. 2) Place bike on solid work stand with rear wheel off the ground. 3) Remove the top and bottom rear shock nuts and bolts. 4) Remove the stock Rawrr Mantis 72V or 60V rear shock. 5) Wipe the top and bottom shock mount flange holes with a cloth or soft brush to clean any dirt or debris. 6) Insert\/slide the 4 shock spacers from the EMoto-X Racing Hawaii  Rear Suspension Kit into the cleaned shock mount flange holes with the flanges of the spacers going on the outside as shown in the photos here (some light tapping with a rubber hammer may be required). 7) Slide your made for Surron, Talaria or ERide Pro (stock or aftermarket) shock into place. 8) Align the top and bottom shock mount holes with the top and bottom of the shock and insert\/slide in the 8MM flange bolts from the EMoto-X Racing Hawaii Rear Suspension Kit through the aligned top and bottom holes and secure with the 8mm flange lock nut using red locktight on the bolt threads and using Rawrr recommended torque specs (we will list number soon)for the top and bottom rear shock bolts and nuts. 9) Reinstall your battery and go have fun on your Rawrr Mantis with a shock absorber that actually absorbs shock and provides a smooth ride. 10) Be sure to ride with caution until you get used to your new shock and how the bike handles and adjust it to perform to your liking and skill level. \u003c\/p\u003e\n\u003cp\u003eFitment: Rawrr Mantis Allterain 72V, Rawrr Mantis Allterain 60V\u003c\/p\u003e","brand":"EMoto-X Racing Hawaii","offers":[{"title":"Default Title","offer_id":51606757540128,"sku":"EMXRRSKHS","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/8AFFAD02-69A0-4866-AFC9-707F5473DDA0_1_105_c_e29a29e8-1a62-4c4d-9f28-1f029ddf720d.jpg?v=1778887207"},{"product_id":"emoto-x-racing-rawrr-mantis-foot-pegs-all-rawrr-bikes","title":"EMoto-X Racing Rawrr Mantis Foot Pegs ALL Rawrr Bikes","description":"\u003cp\u003eEMoto-X Racing Pegs For ALL Rawrr Bikes Mantis X, Mantis X Pro, Mantis Mini, Mantis Mini R, Mantis 72V, Mantis 60V\u003c\/p\u003e\n\u003cp\u003eMassive Upgrade over both your stock pegs and the other aftermarket \"upgrade\" pegs available.\u003c\/p\u003e\n\u003cp\u003e1 Set - Includes one right and one left EMoto-X Racing pegs.\u003c\/p\u003e\n\u003cp\u003e-32 (more than any other peg) Replaceable Stainless Steal Gipping Allen Head Cap Screw Bolts threaded in from the UNDERSIDE.\u003c\/p\u003e\n\u003cp\u003e-Sloped Back Edge for mud scraping.\u003c\/p\u003e\n\u003cp\u003e-Substantially larger platform standing area over stock and most other pegs. Just the right size. Not too big, not too small. \u003c\/p\u003e\n\u003cp\u003e-Angled cross members to better pass mud, less mud packing.\u003c\/p\u003e\n\u003cp\u003e-Coned peg pin bases for less mud packing.\u003c\/p\u003e\n\u003cp\u003e-Incredibly smooth bottom, best pegs available to slide over rocks etc.\u003c\/p\u003e\n\u003cp\u003e-Very smooth outside edge top and bottom with grip pins inset, less likely to cut your shin and calf when you run the peg into the back of your leg or bang it with your shin etc. Less likely to cut up your pants \/ riding gear \/ you.\u003c\/p\u003e\n\u003cp\u003eTested and designed to sit flat and straight on your bike.\u003c\/p\u003e\n\u003cp\u003e-Made of: 7075 CNC aluminum.\u003c\/p\u003e\n\u003cp\u003e-Heavy Duty 10UM\u003c\/p\u003e\n\u003cp\u003e-12UM anodize finish.\u003c\/p\u003e\n\u003cp\u003e-Best for Wheelies if you hook your foot under the peg, so smooth, less likely to cut up your shoes and hurt the top of your foot.\u003c\/p\u003e\n\u003cp\u003e-Best for Wheelies if you hook the back of your heal on the front of the peg, so smooth, less likely to cut up the heal of your shoes and hurt your heal.\u003c\/p\u003e\n\u003cp\u003eWAY more beefy than the other aftermarket pegs we have seen. Hold them in your hand and compare them to all the big name brands.\u003c\/p\u003e\n\u003cp\u003eWhen you are able to compare our pegs in person to the others, there is no doubt which is the better peg.\u003c\/p\u003e\n\u003cp\u003eDifferent colors titanium replaceable grip pins are on our website for more customization.\u003c\/p\u003e\n\u003cp\u003eYou will LOVE your new EMoto-X Racing Pegs!\u003c\/p\u003e\n\u003cp\u003eFitment: \u003cmeta charset=\"utf-8\"\u003eALL Rawrr Bikes Mantis X, Mantis X Pro, Mantis Mini, Mantis Mini R, Mantis 72V, Mantis 60V, Rawrr Mantis All Terrain 72V, Rawrr Mantis All Terrain 60V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect replacement for OEM steal Foot Pegs\u003c\/strong\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e.\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Drop-in fit — no modifications needed. \u003c\/span\u003e\u003c\/p\u003e","brand":"Rawrr Mantis X","offers":[{"title":"Default Title","offer_id":51606759997728,"sku":"EMXRP-BLK","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/20240822_120338.jpg?v=1778665760"},{"product_id":"emoto-x-racing-rawrr-upgrade-controller-modification-service-rawrr-mantis-72v-and-rawrr-mantis-60v-all-terrain-model-bikes-not-for-mantis-x-or-mini","title":"EMoto-X Racing Rawrr Upgrade Controller Modification Service Rawrr Mantis 72V and Rawrr Mantis 60V All Terrain model Bikes. Not for Mantis X or Mini","description":"\u003cp\u003eHuge Power Increase! More Range!\u003c\/p\u003e\n\u003cp\u003eFor 72V All Terrain Mantis, 60V All Terrain\u003c\/p\u003e\n\u003cp\u003eMantis MANTIS X \u0026amp; MINI INFORMATION : Update 3\/12\/2025 Mantis X and Mini Controller Upgrade Update! We have learned recently (2 months or so ago) that the Mantis X and Mini controller have a different wire harness connection at the wire harness and controller plug than that of the 72V and 60V All Terrain models. We can do the EMoto-X Mana Controller Modification Service to the Mantis X and Mini IF we have the whole bike. We DO NOT want you to ship us your bike. We can not do the Mana Controller Modification Service to a Mantis X and Mini controller if you ship your controller to us because the controller does not plug into our modification rig that we use for the 72V and 60V All Terrain models, because of the different plug (at least) into the controller. We would need to invest in a new rig to be able to modify the Mantis X and Mini controllers. Because we no longer have a direct connection to Rawrr since they changed CEO s last summer and flipped a 180 on EMoto-X and stabbed us in the back, we no longer have a business relationship with Rawrr USA. We are struggling with seeing investing in the high cost of building a rig (battery and charger, wire harness, display, voltage regulator, key on off switch) for the Mantis X and Mini as being profitable. If anyone has any of these Mantis X \/ Mini parts they would like to donate to EMoto-X Racing to build a rig to upgrade stock Mantis X controllers, EMoto-X will offer back free EMoto-X Racing Upgrade parts and services as somewhat of a trade in appreciation.\u003c\/p\u003e\n\u003cp\u003e72V \u0026amp; 60V ALL TERRAIN MANTIS INFORMATION: Update 11\/23\/2024 EMoto-X Racing Hawaii Mana Modification Service for ALL Rawrr Mantis 72V and ALL Rawrr Mantis 60V. Huge Power Increase! More Range! The GOOD NEWS is we are able to offer the EMoto-X Racing Hawaii Mana Modified Upgrade Controller Service to ALL of you who have a 72V Mantis All Terrain and ALL of you who have 60V Mantis All Terrain. We currently have a bunch of 72V Rawrr Mantises successfully running the Mana controllers. Some since Dec 2023, some with well over 900 miles. The Mana upgraded controllers deliver SO much power that most of our experienced gas dirt bike riders RARELY use sport mode as it is a handful for most trail and technical track riding and only use sport mode for huge hills and smooth open straightaways.\u003c\/p\u003e\n\u003cp\u003eThe EMoto-X Racing Modified Upgrade Controller Service- The EMoto-X Racing Modified Upgrade Controller Service for the Rawrr Mantis 72V and 60V is a plug and play (once modified) controller that will get your Mantis RIPPING for a longer time\/distance!\u003c\/p\u003e\n\u003cp\u003eThe EMoto-X Racing Modified Upgrade Controller Service will produce about 11000W on the Mantis 72V and about 9000W on the Mantis 60V. Stock Mantises are 7500W. \u003c\/p\u003e\n\u003cp\u003eSimple- The Mana Controller is fixed meaning it can not be tuned* or adjusted like other aftermarket controllers for Talaria and Surron such as KO, BAC, EBMX, Torp etc. *Might be able to adjust the throttle curve and regin with the Rawrr Bluetooth Dongle, yet to be confirmed.\u003c\/p\u003e\n\u003cp\u003ePerfect- The throttle curve is perfectly smooth and the powerband is perfectly linear getting you to top top speed WAY quicker and extending your range.\u003c\/p\u003e\n\u003cp\u003eHassle Free- No need to mess with anything. No need to learn a new program in and out. No hassles or headaches of countless hours having to connect and communicate with a computer or your phone, no programs to download and get to work, no app to deal with, just pure power and more range racing fun!\u003c\/p\u003e\n\u003cp\u003eEasy-How to get your 72V or 60V Rawrr controller to an EMoto-X Racing Modified Upgrade Controller Service - 1)Purchase this EMoto-X Racing Rawrr Controller Modification Service For ALL Rawrr Mantis 72V and Rawrr Mantis 60V here at our website or an authorized EMoto-X Racing dealer. 2) Easily remove your stock Mantis Controller (directions below) and mail it to us (shipping directions below) at the address below. 3)Bolt your controller back in (directions below) when EMoto-X ships it back to you, turn on your key, go enjoy way more power and range!\u003c\/p\u003e\n\u003cp\u003eReviews \/ Testimonials \/ Product Test Riders We initially set up 7 test riders with the EMoto-X Racing Mana Controllers back in Dec 2023 who have been ripping, testing, abusing, and most of all flat out having a blast riding their more powerful Mantises with more range. 3 of the Emoto-X test riders are adult male experienced gas dirt bike trail riders. Our adult male trail riders say that they rarely use Sport Mode because it is too fast and powerful for most trail riding and technical track riding and even Eco 3 Mode is sometimes a handful for the more technical terrain, Eco 2 Mode is pretty darn fast and fun and Eco 1 Mode is slow as it should be. The other 3 EMoto-X test riders are youth male\/ teenage riders, one being a current gas dirt bike racer and wheelie specialist (see him at @mantis_monster_21 ) and the other two are talented very fast riders and wheelie kings as well. These 3 youth test riders ride all day every day (when they are not in school) hammering the living _____ out of their Mantises which are now (with the Mana Controller installed) their favorite E motos to ride over their Surrons and Talarias that now sit in the garage. Zero issues of any sort with all 6 test riders Mantises! Nothing but smiles and fun! One more new test rider:  He is 47 years old 10 year veteran rider who also owns an Appollo\/RFN Ares Pro Rally. He felt the Mantis was greatly lacking power for his trails \/ single track riding style and preference. He absolutely LOVES his Mantis now with the EMoto-X Racing Mana Controller Modification. 6 New happy riders from Plymouth County Motorsports since beginning of November 2024 (See owner Chuck's review below). Range- We have not done any real measurable range testing yet but we are incredibly happy with the riding time lengths and miles! Range and Power Review- By Chuck Kulda of Plymouth County Powersports Nov. 18,2024 - The boys at Plymouth County Powersports finally got to test the Emotox controller on the Rawrr Mantis this weekend for efficiency we already knew it gave us a lot more power no questions there . Four bikes, two of them with the Emoto-X Racing Hawaii controller and two without all four bikes at 100% battery life all 4 riders weighed about 180. Mined you one of these bikes have 11,000 miles on it . Started out with 12 mile ride on the roads to our destination, which were several grass retention ponds for freestyle, jumping, and what not. spent about a half hour there. Drove about another 8 miles to get lunch. Now for a ride home. We got home with about 46 miles on the bikes. On the two stock bikes one had 39% battery life left the other stock bike had 43% left. On the two modified Emoto-X bikes we got one at 56% and 54%. Notes. All the road riding was done in Eco 2 And all playing around was done in sport mode What we like the best was the relatively low cost of sending the controller out to be reprogrammed and getting longer battery life of course more power is awesome, but being able to make it home seems much more appealing to us. Range VS Modded 72V Surron- Two of the adult test riders from Watercraft Works in Rancho Cordova CA. with the EMoto-X Racing Mana Modified Controller started with 100% battery charge and went on a 2 hour 20 miles full pinned hammer down trial ride rip with multiple hill climbs, jumps whoops, built berms etc. and had 50% battery remaining at the end as apposed to 17% battery remaining on their friend's built Surron LBX with a BAC 8000 and 72V ChiBattery who did the ride with them!\u003c\/p\u003e\n\u003cp\u003eWarranty- The EMoto-X Racing LLC Mana Controller is a racing electrical component which is subject to miss installation and many other factors that the purchaser or end user can do and may do to irreversibly damage the electrical component, as such, there is no warranty on the EMoto-X Racing Mana Controller as we have no control of the part once it leaves our hands. However , we at EMoto-X are good people and want everyone to be satisfied and enjoy our products and will handle any issues that may arise on a case by case basis to see our customers happy if we can. EMoto-X Racing LLC having the full right and sole jurisdiction to do as we see fit in each individual situation including doing nothing at all. Installing the EMoto-X Racing Mana Modified Controller WILL VOID the 1 year Rawrr Manufactures warranty your bike may have.\u003c\/p\u003e\n\u003cp\u003eCONTROLLER REMOVAL DIRECTIONS: Read all directions first, before beginning. Be sure to contact EMoto-X for any clarifications or questions you have before you begin installing. The EMoto-X Racing Mana Modified Controller is an exact plug and play part, meaning it bolts and wires in and installs exactly the same as your stock Mantis controller. 1) Turn the breaker off and clean your stock Rawrr controller free of any mud and dirt etc. 2) With the controller clean and dry and the breaker still off, remove the battery. NEVER reinstall the battery until the final step of the installation process. 3) Once the breaker is off and the battery is removed from the bike, remove your stock controller by removing the 4 long (#5 allen wrench) plastic controller mount bolts. 4) Once the plastic controller mount is detached from the bike with the stock controller, remove the plastic cable and wire cover by taking out the 2 small taper head (T10) screws . 5) With the plastic wire and cable cover removed, take a few photos of the back of the stock controller clearly showing all the battery and motor cable connections positions and routing and clearly all the plug and wire connections and positions and routing BEFORE removing any cables, wires or plugs. 6) Make sure your pictures are clear and clearly show everything as it is, save these pictures to be used for reference to copy for installation process. It might also help to tape and label each wire and cable at this point. 7) After getting good clear pictures and saving of all cables, wires and plugs and routing, remove the three controller mount bolts (#3 allen wrench) and all the cables, wires and plugs form the stock controller being carful not to damage any of the plug clips etc. 8) Clearly write your name, phone number, and ship back to address on masking tape and stick it to the controller getting it ready to box and ship.\u003c\/p\u003e\n\u003cp\u003eSHIPPING DIRECTIONS: Ship\/mail your controller to: EMoto-X Racing Hawaii 4348 Waialae Ave #338 Honolulu HI 96816 We highly recommend using a well padded \/ packed USPS Priority Mail Medium Flat Rate Box (free at the post office) 11\" X 8 1\/2\" X 5 1\/2\" which is $19.30 to ship anywhere in the US and choosing to insure it at a value of $600.00 (the cost of a new controller from Rawrr) which is $11.00 = $30.30 shipping cost to EMoto-X Racing Hawaii. This is the service and insurance we use to ship back to you for $31.00. INSTALLATION INSTRUCTIONS: 1) Make sure the breaker is off and the battery is still out. 2) With your breaker still off and your battery still out, use your saved photos from the removal process as a reference to be sure to connect the battery and motor cable connections and all the plug and wire connections to the exact same places with the same routing on the EMoto-X Racing Mana Modified Controller as they were on the stock controller using blue locktight on the treads of the battery cable and motor cable connections bolts and dielectric grease on the plug and wire connections. 3) After the battery and motor cables and plugs and wires are connected, take a few moments to double and triple check that all is solidly connected correctly referring to your saved pictures. 4) Reattach the Mana Modified Controller to the plastic controller mount with the 3 allen bolts using blue locktight on the threads of the bolts. 5) Reinstall the plastic cable and wire cover with the 2 small taper head screws (T10) using no locktight on the threads. 6) Reattach the plastic controller mount with the EMoto-X Racing Mana Modified Controller to the bike with the 4 long allen bolts using blue locktight on the threads of the bolts being extremely careful not to pinch, smash or damage any of the cables and wires. 7) Reinstall the battery, turn on the breaker, turn on your key, go have the time of your life!\u003c\/p\u003e\n\u003cp\u003eDisclaimer: EMoto-X Racing parts are for closed course racing only and are not to be used on any streets or any other riding situation that is not a closed racing course, in addition, modifying a stock electric vehicle can result in the vehicle becoming non-compliant with your local road safety regulations. Installing the aftermarket modified controller on the stock electric motorcycle might deviate from the manufacturer’s original design and safety standards. Consequently, these modifications can render the motorcycle illegal for road use in your country or state, as it may no longer meet the stringent safety and performance criteria set by your transportation authorities. It’s essential to consult with experts or authorities before modifying your vehicle to ensure adherence to road legality. EMoto-X Racing LLC is not in any way responsible for any damages or injuries that might occur during the use of their products. Emoto-X Racing LLC is not liable for any legal implications regarding the use of our products on your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFitment: Rawrr Mantis Allterain 72V, Rawrr Mantis Allterain 60V \u003c\/p\u003e","brand":"EMoto-X Racing Hawaii","offers":[{"title":"Default Title","offer_id":51606762225952,"sku":"EMXRCMS","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/mod_20service_20pic_20.jpg?v=1778665929"},{"product_id":"emoto-x-racing-color-titanium-peg-replacement-pins-for-all-emoto-x-pegs-32-count","title":"EMoto-X Racing Color Titanium Peg Replacement Pins For All EMoto-X Pegs 32 Count","description":"\u003cp\u003eEMoto-X Racing Colored Titanium Peg Replacement Pins For All EMoto-X Racing Pegs. \u003c\/p\u003e\n\u003cp\u003e-Complete Set 32 Count\u003c\/p\u003e\n\u003cp\u003eMake the best pegs on the planet even better with these grade 5 titanium colored replacement pins. Choose from: Burnt Blue, Red, Purple, Green, Blue, Gold, Turquoise and Black.\u003c\/p\u003e\n\u003cp\u003eSee our other part # EMXSSPP for Silver original stainless steal replacement pegs pins for silver color and part # EMXSSPPE our 2MM Longer Enduro Silver Stainless Grip Pins for extreme off road conditions. \u003c\/p\u003e\n\u003cp\u003eFitment: All EMoto-X Racing Foot Pegs for Surron Lightbee, Surron Ultra Bee, All Talaria, All Eride Pro, All Rawrr, Surron Light Bee, Surron LBX, Ventus, 79 Bike, Rerode, Altis Sigma\u003c\/p\u003e\n\u003cp\u003eDirect replacement of EMoto-X Racing Foot Pegs OEM stainless steal grip pins. \u003c\/p\u003e","brand":"EMoto-X Racing Hawaii","offers":[{"title":"Burnt Blue","offer_id":51606780084512,"sku":"EMXTPP-BBLU","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":51606780248352,"sku":"EMXTPP-GLD","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":51606780182816,"sku":"EMXTPP-PUR","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51606780281120,"sku":"EMXTPP-BLK","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":51606780313888,"sku":"EMXTPP-BLU","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51606780117280,"sku":"EMXTPP-RED","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":51606780051744,"sku":"EMXTPP-GRN","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Turquoise","offer_id":51606780150048,"sku":"EMXTPP-TRQ","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Magnesium","offer_id":51606780215584,"sku":"EMXTPP-MGN","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/0EB41637-A23C-430B-A8F5-9D24A6A6C645.jpg?v=1778876516"},{"product_id":"emoto-x-racing-enduro-long-peg-replacement-pins-for-all-emoto-x-pegs-32-count-copy","title":"EMoto-X Racing Long Peg Replacement Pins For All EMoto-X Pegs 32 Count (Copy)","description":"\u003cp\u003eEMoto-X Racing Long Stainless Peg Replacement Pins For All EMoto-X Racing Pegs. \u003c\/p\u003e\n\u003cp\u003e-Complete Set 32 Count\u003c\/p\u003e\n\u003cp\u003eMake the best pegs on the planet even better with these 2MM Longer Stainless Steal Replacement Grip Pins for extreme off road foot traction.  \u003c\/p\u003e\n\u003cp\u003eSee our other part # EMXSSPP for Silver original length stainless steal replacement pegs pins and our part # EMXTPP  for our Colored Titanium Grip Pins for some extra bling for your emoto. Second picture shows a mixture of both length Stainless Grip Pins for comparison. \u003c\/p\u003e\n\u003cp\u003eFitment: All EMoto-X Racing Foot Pegs for Surron Lightbee, Surron Ultra Bee, All Talaria, All Eride Pro, All Rawrr, Surron Light Bee, Surron LBX, Ventus, 79 Bike, Rerode, Altis Sigma\u003c\/p\u003e\n\u003cp\u003eDirect replacement of EMoto-X Racing Foot Pegs OEM stainless steal grip pins. \u003c\/p\u003e","brand":"EMoto-X Racing Hawaii","offers":[{"title":"Default Title","offer_id":51736150376736,"sku":"EMXSSPPL","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/EFB308B1-4024-40E7-8A3A-9479A63F43EE_1_201_a.jpg?v=1779509977"},{"product_id":"emoto-x-racing-rawrr-upgrade-controller-modification-service-rawrr-mantis-72v-and-rawrr-mantis-60v-all-terrain-model-bikes-not-for-mantis-x-or-mini-copy","title":"Rawrr Controller Assembly With EMoto-X Racing Modification Service For Rawrr Allterain Mantis 72V and Rawrr All-terrain Mantis 60V !Not for Mantis X, Mini or X Pro!","description":"\u003cp\u003eNew Complete Rawrr Controller Assembly (Rawrr Part# 02-16-06) with EMoto-X Racing Modification Service already done. \u003c\/p\u003e\n\u003cp\u003eTHIS ALREADY MODIFIED CONTROLLER IS THE LAST ONE OF THESE WE WILL EVER HAVE- We will continue to modify controllers mailed to us. \u003c\/p\u003e\n\u003cp\u003eHuge Power Increase! \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eMore Range!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGet the hill climbing and front wheel lifting power you wish your stock Rawrr had!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 72V All Terrain Mantis, 60V All Terrain Mantis, \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNot\u003c\/strong\u003e\u003c\/span\u003e for X, X Pro or Mini \u003c\/p\u003e\n\u003cp\u003eEMoto-X Racing Hawaii has been modifying controllers for the All Terrain Mantis bikes Since Dec 2023, some with well over 2000 miles. The Mana upgraded controllers deliver SO much power that most of our experienced gas dirt bike riders RARELY use sport mode as it is a handful for most trail and technical track riding and only use sport mode for huge hills and smooth open straightaways.\u003c\/p\u003e\n\u003cp\u003eThe EMoto-X Racing Modified Upgrade Controller Service- The EMoto-X Racing Modified Upgrade Controller Service for the Rawrr Mantis 72V and 60V is a plug and play (once modified) controller that will get your Mantis RIPPING for a longer time\/distance!\u003c\/p\u003e\n\u003cp\u003eThe EMoto-X Racing Modified Upgrade Controller Service will produce about 11000W on the Mantis 72V and about 9000W on the Mantis 60V. Stock Mantises are 7500W. \u003c\/p\u003e\n\u003cp\u003eSimple- The Mana Controller is fixed meaning it can not be tuned or adjusted like other aftermarket controllers for Talaria and Surron such as EBMX, Torp etc. \u003c\/p\u003e\n\u003cp\u003ePerfect- The throttle curve is perfectly smooth and the powerband is perfectly linear getting you to top top speed WAY quicker and extending your range.\u003c\/p\u003e\n\u003cp\u003eHassle Free- No need to mess with anything. No need to learn a new program in and out. No hassles or headaches of countless hours having to connect and communicate with a computer or your phone, no programs to download and get to work, no app to deal with, just pure power and more range racing fun!\u003c\/p\u003e\n\u003cp\u003eEasy- Easily remove your stock Mantis Controller (directions below) and bolt this  controller back in (directions below), turn on your key, go enjoy way more power and range!\u003c\/p\u003e\n\u003cp\u003eReviews \/ Testimonials \/ Product Test Riders We initially set up 7 test riders with the EMoto-X Racing Mana Controllers back in Dec 2023 who have been ripping, testing, abusing, and most of all flat out having a blast riding their more powerful Mantises with more range. 3 of the Emoto-X test riders are adult male experienced gas dirt bike trail riders. Our adult male trail riders say that they rarely use Sport Mode because it is too fast and powerful for most trail riding and technical track riding and even Eco 3 Mode is sometimes a handful for the more technical terrain, Eco 2 Mode is pretty darn fast and fun and Eco 1 Mode is slow as it should be. The other 3 EMoto-X test riders are youth male\/ teenage riders, one being a current gas dirt bike racer and wheelie specialist (see him at @mantis_monster_21 ) and the other two are talented very fast riders and wheelie kings as well. These 3 youth test riders ride all day every day (when they are not in school) hammering the living _____ out of their Mantises which are now (with the Mana Controller installed) their favorite E motos to ride over their Surrons and Talarias that now sit in the garage. Zero issues of any sort with all 6 test riders Mantises! Nothing but smiles and fun!\u003c\/p\u003e\n\u003cp\u003eOne more new test rider:  He is 47 years old 10 year veteran rider who also owns an Appollo\/RFN Ares Pro Rally. He felt the Mantis was greatly lacking power for his trails \/ single track riding style and preference. He absolutely LOVES his Mantis now with the EMoto-X Racing Mana Controller Modification.\u003c\/p\u003e\n\u003cp\u003e6 New happy riders from Plymouth County Motorsports since beginning of November 2024 (See owner Chuck's review below).\u003c\/p\u003e\n\u003cp\u003eRange- We have not done any real measurable range testing yet but we are incredibly happy with the riding time lengths and miles! Range and Power Review- By Chuck Kulda of Plymouth County Powersports Nov. 18,2024 - The boys at Plymouth County Powersports finally got to test the Emotox controller on the Rawrr Mantis this weekend for efficiency we already knew it gave us a lot more power no questions there . Four bikes, two of them with the Emoto-X Racing Hawaii controller and two without all four bikes at 100% battery life all 4 riders weighed about 180. Mined you one of these bikes have 11,000 miles on it . Started out with 12 mile ride on the roads to our destination, which were several grass retention ponds for freestyle, jumping, and what not. spent about a half hour there. Drove about another 8 miles to get lunch. Now for a ride home. We got home with about 46 miles on the bikes. On the two stock bikes one had 39% battery life left the other stock bike had 43% left. On the two modified Emoto-X bikes we got one at 56% and 54%. Notes. All the road riding was done in Eco 2 And all playing around was done in sport mode What we like the best was the relatively low cost of sending the controller out to be reprogrammed and getting longer battery life of course more power is awesome, but being able to make it home seems much more appealing to us. Range VS Modded 72V Surron- Two of the adult test riders from Watercraft Works in Rancho Cordova CA. with the EMoto-X Racing Mana Modified Controller started with 100% battery charge and went on a 2 hour 20 miles full pinned hammer down trial ride rip with multiple hill climbs, jumps whoops, built berms etc. and had 50% battery remaining at the end as apposed to 17% battery remaining on their friend's built Surron LBX with a BAC 8000 and 72V ChiBattery who did the ride with them!\u003c\/p\u003e\n\u003cp\u003eCONTROLLER REMOVAL DIRECTIONS: Read all directions first, before beginning. Be sure to contact EMoto-X for any clarifications or questions you have before you begin installing. The EMoto-X Racing Mana Modified Controller is an exact plug and play part, meaning it bolts and wires in and installs exactly the same as your stock Mantis controller. 1) Turn the breaker off and clean your stock Rawrr controller free of any mud and dirt etc. 2) With the controller clean and dry and the breaker still off, remove the battery. NEVER reinstall the battery until the final step of the installation process. 3) Once the breaker is off and the battery is removed from the bike, remove your stock controller by removing the 4 long (#5 allen wrench) plastic controller mount bolts. 4) Once the plastic controller mount is detached from the bike with the stock controller, remove the plastic cable and wire cover by taking out the 2 small taper head (T10) screws . 5) With the plastic wire and cable cover removed, take a few photos of the back of the stock controller clearly showing all the battery and motor cable connections positions and routing and clearly all the plug and wire connections and positions and routing BEFORE removing any cables, wires or plugs. 6) Make sure your pictures are clear and clearly show everything as it is, save these pictures to be used for reference to copy for installation process. It might also help to tape and label each wire and cable at this point. 7) After getting good clear pictures and saving of all cables, wires and plugs and routing, remove the three controller mount bolts (#3 allen wrench) and all the cables, wires and plugs form the stock controller being carful not to damage any of the plug clips etc. 8) Clearly write your name, phone number, and ship back to address on masking tape and stick it to the controller getting it ready to box and ship.\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS: 1) Make sure the breaker is off and the battery is still out. 2) With your breaker still off and your battery still out, use your saved photos from the removal process as a reference to be sure to connect the battery and motor cable connections and all the plug and wire connections to the exact same places with the same routing on the EMoto-X Racing Mana Modified Controller as they were on the stock controller using blue locktight on the treads of the battery cable and motor cable connections bolts and dielectric grease on the plug and wire connections. 3) After the battery and motor cables and plugs and wires are connected, take a few moments to double and triple check that all is solidly connected correctly referring to your saved pictures. 4) Reattach the Mana Modified Controller to the plastic controller mount with the 3 allen bolts using blue locktight on the threads of the bolts. 5) Reinstall the plastic cable and wire cover with the 2 small taper head screws (T10) using no locktight on the threads. 6) Reattach the plastic controller mount with the EMoto-X Racing Mana Modified Controller to the bike with the 4 long allen bolts using blue locktight on the threads of the bolts being extremely careful not to pinch, smash or damage any of the cables and wires. 7) Reinstall the battery, turn on the breaker, turn on your key, go have the time of your life!\u003c\/p\u003e\n\u003cp\u003eDisclaimer: EMoto-X Racing parts are for closed course racing only and are not to be used on any streets or any other riding situation that is not a closed racing course, in addition, modifying a stock electric vehicle can result in the vehicle becoming non-compliant with your local road safety regulations. Installing the aftermarket modified controller on the stock electric motorcycle might deviate from the manufacturer’s original design and safety standards. Consequently, these modifications can render the motorcycle illegal for road use in your country or state, as it may no longer meet the stringent safety and performance criteria set by your transportation authorities. It’s essential to consult with experts or authorities before modifying your vehicle to ensure adherence to road legality. EMoto-X Racing LLC is not in any way responsible for any damages or injuries that might occur during the use of their products. Emoto-X Racing LLC is not liable for any legal implications regarding the use of our products on your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eWarranty- The EMoto-X Racing LLC Mana Controller is a racing electrical component which is subject to miss installation and many other factors that the purchaser or end user can do and may do to irreversibly damage the electrical component, as such, there is no warranty on the EMoto-X Racing Mana Controller as we have no control of the part once it leaves our hands. However , we at EMoto-X are good people and want everyone to be satisfied and enjoy our products and will handle any issues that may arise on a case by case basis to see our customers happy if we can. EMoto-X Racing LLC having the full right and sole jurisdiction to do as we see fit in each individual situation including doing nothing at all. Installing the EMoto-X Racing Mana Modified Controller WILL VOID the 1 year Rawrr Manufactures warranty your bike may have.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFitment: Rawrr Mantis Allterain 72V, Rawrr Mantis Allterain 60V \u003c\/p\u003e","brand":"EMoto-X Racing Hawaii","offers":[{"title":"Default Title","offer_id":51753281945888,"sku":"EMXRCMC","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0044\/8288\/files\/0A1D63B8-E714-42EF-BE4C-3B255C4AA1C2.jpg?v=1780021556"}],"url":"https:\/\/emoto-x.com\/collections\/rawrr-parts-1.oembed","provider":"EMoto-X Racing Hawaii","version":"1.0","type":"link"}